simplify3d patch Archives - CrackORG

Como configurar simplify3d Archives

como configurar simplify3d Archives

If You change something in cura it will make new files and put them in Simplify3D version 4.1.2 using a profile for an Ender 5 as. To have Simplify3D automatically upload files to OctoPrint, Typically, Windows doesn't come with cURL pre-installed, so we'll need the. And well, my first test with this printer was so bad that when I tried about three files, they didn't come out well. Unlike the compact, this machine did. como configurar simplify3d Archives Artillery Genius Profile for Simplify3D and Prusa Slicer" width="670" height="102">
  • Replace the two lines with the following:
    Simplify 3D custom buildplate
  • Save the file and import the profile back into Como configurar simplify3d Archives 3D by navigating to File-> Import FFF Profile.
  • That’s it. Now, your build plate should look like this:Artillery Genius Custom Buildplate in Simplify 3D <div><h2>Complete guide: Configure Marlin 2.0.x from scratch and not die trying it</h2><div><p>Recently some users of the <strong>Telegram</strong> channel were interested in how to configure <strong>Marlin 2.0.x</strong> and they exposed it in the group. Having seen what I saw I thought, Why not write a complete guide to configure Marlin step by step?</p><p>It was something that had been on my mind for a long time, since <a href=fabfilter serial key Archives printers continued to work with an old version of firmware (specifically v1.1.9). So without further ado I got down to work and started writing.


    Brief introduction

    This guide is not intended to be a boring and tedious Marlin manual. I will simply show you the essential (or more basic) options to consider to configure Marlin quickly.

    I will use as an example a “Custom” printer that I designed some time ago, and step by step you will discover where and how to configure Marlin 2.0.x successfully for your 3D printer.

    But I would like to indicate 2 important things before starting. The first is that my mother tongue is Spanish, so I try to write the articles in Spanish and English, but the English version of the article may have some misprints. If so, I apologize in advance.

    And the second is that perhaps there is some parameter that como configurar simplify3d Archives to the mechanics of your printer does not appear in the article. If so, and you have read the guide completely, you will already understand how Marlin works, and I am sure that it will not be difficult to find it in the Firmware.

    At the end of the day the goal is for you to learn to cope with Marlin yourself and lose your fear, and not to depend on guides like this.

    Here is the index, so if you need it you can access a specific parameter to consult more quickly. Let’s go then with the article without further delay…



    Configure Marlin 2.0.x from scratch

    I highly recommend that you follow the order of the article when setting it up. The reason is that the parameters will also be found in the same order when you edit the firmware. And in this way you will not run the risk of leaving one on the way.

    The most important thing is to lose your fear of Marlin, and if this article helped you it would have more than fulfilled its objective. Knowing Marlin you will understand and enjoy a little more the exciting world of 3D printing and all its possibilities.

    And if you have any questions along the way, you can always share them on our Telegram. Surely a partner will be more than willing to give you a cable.


    Introduction to Marlin 2.0.x

    Guía completa para configurar Marlin 2.0.x desde cero y no morir en el intento

    Configure Marlin 2.0.x on your printer can seem like a challenge at first glance and something only seasoned programmers can achieve. But that statement couldn’t be further from the truth, believe me.

    With a little patience and a good text editor, we can configure any arduino-based printer with the latest firmware versions without any problem (and without programming knowledge). In fact, como configurar simplify3d Archives, Marlin is made up of many, como configurar simplify3d Archives, many files, but we will only need to modify one or two at the most to compile a working como configurar simplify3d Archives and then upload it to our printer.

    Of course, you can customize Marlin 2 as much as you want, but we already need to modify quite a few files that we will not mention at the moment or that we will do later.

    You are probably wondering why you como configurar simplify3d Archives have to learn to configure Marlin 2.0.x. The answers can be diverse, but the one that convinces me the most is that it provides us with security, performance improvements, and of course, corrections of possible errors reported in previous versions.

    However, I will not deny that during the configuration and compilation process, errors or problems that seem difficult to solve can occur. But with Google and a little patience, we shouldn’t have too much trouble. We are Makers, who said fear?

    In this manual to configure Marlin 2.0.x, and as I mentioned a few lines above, we will use as an example a “Custom” printer that I designed and built some time ago. So you can see the changes I make and then apply it to your own machine. We will open the files and change the parameters in order (from the beginning of the file to the end).

    Have in mind that for configure Marlin 2 you will need to know in advance all the technical characteristics and components of your machine. Such as extruder type, printing volume, thermistor, etc, como configurar simplify3d Archives. So collect all this information beforehand and let’s get to it without further ado.


    Marlin Builder: Configure Marlin via web

    Before starting this complete guide on how to configure Marlin 2.0.x from scratch, I wanted to show you an application that I developed some time ago in 3DWork called Marlin Builder.

    As you will soon learn, the “orthodox” way of compiling a Marlin firmware is summarized in the following: Download the firmware from the official website, edit it by hand, compile it and upload it to your printer (4 steps).

    Since editing the firmware is quite tedious, I created the Marlin Builder tool, an “alternative” when it comes to editing all that code by hand. If what you want is to edit it by hand, which I love I admit, keep reading from the next point of the article where I already explain the whole process.

    But if instead you want to edit the Marlin firmware via the web, access our application at the following link: Marlin Builder.

    Basically, Marlin Builder consists of a Wizard (or configuration assistant) that will guide us through 5 sections, como configurar simplify3d Archives. Each of these sections controls the basic parameters to compile a Marlin according to the mechanics and electronics. So when you have the 5 sections configured, you click to download firmware and you are ready. It sounds easy como configurar simplify3d Archives, don’t be so happy as Marlin Builder doesn’t work miracles. If you configure something wrong, the compiler will show you an error. However, you can consult all the parameters in this article, and if you do not have como configurar simplify3d Archives experience, it is practically mandatory that you read it, como configurar simplify3d Archives. Good luck with that!


    Preparing our PC (necessary files)

    Guía completa para configurar Marlin 2.0.x desde cero y no morir en el intento

    The first thing you should do is prepare your PC to be able to compile the firmware (and edit it obviously). It will just be three easy steps, so let’s get to it:


    Downloading the Marlin Firmware

    Very simple, much like going to the official Marlin website, clicking on the section Download and search for the latest firmware available.

    In this article we will use version but new revisions and/or updates are published periodically, so choose the version you need. I recommend that you download the “Latest release” version, it is a link called ““.

    After downloading it, unzip it into como configurar simplify3d Archives folder on your computer’s desktop. Do not delete the compressed file, it can always help us to go back in our steps if we modify “too many things” within the firmware and we want to start from scratch again.


    Text editor (Notepad, Sublime, Atom, etc.)

    You will also need a good text editor. You can use the Arduino IDE interface, but I recommend using an editor oriented to programming.

    These usually detect the programming structures and put different colors to the commands, variables, constants, etc. In such a way that they visually como configurar simplify3d Archives the compression of the code, something very welcome.

    I personally use Sublime, since I started programming in PHP with this text editor. However you have multiple options such as Atom, Vim, VS Code, Notepad++ and many others. They all work very well, it is simply to adapt to the one you choose.


    Download Arduino IDE (Option 1)

    After modifying our Marlin firmware with your favorite editor, you must compile it before uploading it to the printer. To do this, you will use an integrated development environment, como configurar simplify3d Archives, commonly called Como configurar simplify3d Archives, that Arduino offers completely free to the community.

    Of course, we can download it from the arduino official website. To do this, you must access the Software->Downloads section, select Windows Installer (for example) and press the Just Download button to download it.

    You can also make a contribution to the great development team behind Arduino. You just have to click on Contribute & Como configurar simplify3d Archives and follow the instructions that will be shown on UMT Dongle 5.4 latest Archives website.


    Download Visual Studio Code (Option 2)

    As an alternative to the Arduino compiler, you can download and use Visual Studio Code, a software that I recommend since it includes a code editor and compiler all in one. And what’s more, if you need to download extra libraries for the firmware, it will manage it for you como configurar simplify3d Archives Studio Code can be downloaded for free from your web page. In fact some time ago I wrote a guide on how to configure it to compile Marlin firmwares, and that you have available at the following link: Configure and update your 3D printer using Visual Studio Code and


    “Configuration.h” file

    As I mentioned before, there are 2 main files that manage everything when configuring Marlin 2.0.x, como configurar simplify3d Archives. Of course, there are many more changes and modifications that we could make but for our current purpose they are como configurar simplify3d Archives necessary at the moment (modifications of the original menu, como configurar simplify3d Archives, logos, etc.)

    So we are going to start editing the Configuration.h file with the editor we have chosen (in my case Sublime), and we will follow in order the different most common options to take into account. Comment that this file contains the main hardware, language and driver settings, as well as settings for the most common features and components of our printer.

    In white color, you can see the options that I have activated (or that are activated by default), and in dark gray the options that are deactivated. To activate an option we only have to eliminate the two bars “//” in front of the parameter in question. And to disable them otherwise, add them. If you are developer you como configurar simplify3d Archives be familiar with this procedure.

    In the case that we leave some parameter without reference due to the innumerable number of existing printers, do not hesitate to indicate it in the comments at the end of the article. In this way we will gradually complete all the information and it may be useful to more users.


    Marlin logotype (SHOW_BOOTSCREEN)

    It’s the Marlin logo that appears when the firmware boots. By default it appears active, we can deactivate it if we wish without any problem. Como configurar simplify3d Archives is not essential to configure Marlin 2 but we may even free up some memory.

    You can also put your own logo or custom image, but we will explain that at the end of this guide in the section “Interesting tricks for Marlin“.

    // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** #define SHOW_BOOTSCREEN


    Communication ports (SERIAL_PORT y SERIAL_PORT_2)

    They are the communication ports of our electronics. In principle, the first one should not be modified unless you have some exotic electronics. The second I leave it disabled because I have an electronic MKS Gen v1.4 .

    If your electronic board is a SKR V1.4 or SKR V1.4 Turbo you need activate SERIAL_PORT_2 and put the value -1 (as is by default). And for electronics SKR GTR V1.0 you must put the values ​​-1 and 3 respectively in SERIAL_PORT and SERIAL_PORT_2.

    These are certainly the electronics that I am most familiar with. For others you will have to search the values ​​online, something that will not take you too long to locate.

    /** * Select the serial port on the board to use for communication with the host. * This como configurar simplify3d Archives the connection of wireless adapters (for instance) to non-default port pins. * Serial port -1 is the USB emulated serial port, if available. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ #define SERIAL_PORT 0 /** * Select a secondary serial port on the board to use for communication with the host. * :[-1, 0, como configurar simplify3d Archives, 1, 2, 3, 4, 5, 6, 7] */ //#define SERIAL_PORT_2 -1


    Communication speed (BAUDRATE)

    Speed ​​at which we will connect our computer to the printer, by default it is 250000 so we will leave it that way.

    If by chance you have communication problems with your printer, you can lower the speed of this parameter to try to solve it.

    /** * This setting como configurar simplify3d Archives the communication speed of the printer. * * 250000 works in most cases, but you might try a lower speed if * you commonly experience drop-outs during host printing. * You may try up to 1000000 to speed up SD file transfer. * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ #define BAUDRATE 250000


    Motherboard or electronics (MOTHERBOARD)

    Very important parameter. Here we will select the electronics that we have installed in our 3D printer. As there are many electronics available, como configurar simplify3d Archives, we will have to find como configurar simplify3d Archives one is ours and the value to place here.

    You have a list of compatible electronics to use in the file “boards.h“. This is located in the following path of your Marlin firmware: \Marlin\src\core\boards.h

    In my case, my 3D printer uses a MKS Gen v1.4 electronic boards. For it I must write “BOARD_MKS_GEN_13” as you can see in the example. You configure the one you have.

    // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_13 #endif


    Name of your machine (CUSTOM_MACHINE_NAME)

    This is easy, the name you want your new configured printer to have. By default you will notice that it is disabled, como configurar simplify3d Archives, hence these 2 bars appear “//” in front of #define.

    We will remove the 2 bars and leave the configuration like this:

    // Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Pulsar X1 PRO"


    Number of extruders (EXTRUDERS)

    Here we are going to configure the number of extruders that our 3D printer has. By default, the initial value is 1, since most have an extruder. If this is not your case, enter the correct number of extruders.

    // This defines the como configurar simplify3d Archives of extruders // :[1, 2, 3, 4, 5, 6, 7, 8] #define EXTRUDERS 1


    Filament diameter (DEFAULT_NOMINAL_FILAMENT_DIA)

    In this section we will select the type of diameter that our printer uses. By default 3.0 comes, something strange since now most printers already usually operate at 1.75 in diameter. We will have to change it, very important 🙂

    // Generally expected filament diameter (1.75, 2.85, como configurar simplify3d Archives, 3.0. .). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75


    Prusa Multimaterial Kit (PRUSA_MMU2)

    Activate it if you have installed the original Josef Prusa multimaterial kit or some other chinese clon that are available in the market. If not, leave it as it is, with the two bars on.

    /** * Prusa Multi-Material Unit v2 * * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. * Requires EXTRUDERS = 5 * * For additional configuration see Configuration_adv.h */ //#define PRUSA_MMU2


    Temperature sensors (TEMP_SENSORS)

    In this section of the Marlin firmware we will define the existing temperature sensors in our 3D printer. In this latest version, has been added support for more extruders (with a total of 11 sensors supported), including a sensor for the chamber temp.

    As you can see, there are a lot of them, and a list appears in the code itself. In the case that you do not have information about yours, como configurar simplify3d Archives, try consulting Google as it will probably como configurar simplify3d Archives documented by some other user with your same printer.

    By default, only TEMP_SENSOR_0 is configured with value “1”. In my case, I must put the value “5” there.

    As I also have a heated bed, to improve adhesion during printing and avoid Warping issues, I setup TEMP_SENSOR_BED with the value 1. I leave the rest at 0 since I don’t have any more extruders or a closed chamber at this printer.

    /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table * * Temperature sensors available: * * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) * -3 : thermocouple with MAX31855 (only for sensors 0-1) * -2 : thermocouple with MAX6675 (only for sensors 0-1) * -4 : thermocouple with AD8495 * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan J-Head) (4.7k pullup) * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) * 10 : 100k RS como configurar simplify3d Archives 198-961 (4.7k pullup) * 11 : 100k beta 3950 1% thermistor (4.7k pullup) * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) * 13 : 100k Hisens 3950 1% up to 300°C for hotend "All In ONE" * 15 como configurar simplify3d Archives 100k thermistor calibration for JGAurora A5 hotend * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 * 20 : Pt100 with circuit in the Ultimainboard V2.x * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup * 66 : 4.7M High Temperature thermistor from Dyze Design * 67 como configurar simplify3d Archives 450C thermistor from SliceEngineering * 70 : the 100K thermistor found in the bq Hephestos 2 * 75 : como configurar simplify3d Archives Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) * * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. * (but gives greater accuracy and more stable PID) * 51 : 100k thermistor - EPCOS (1k pullup) * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan J-Head) (1k pullup) * * 1047 : Pt1000 with 4k7 pullup * como configurar simplify3d Archives 1010 : Pt1000 with 1k pullup (non standard) * 147 : Pt100 with 4k7 pullup * 110 : Pt100 with 1k pullup (non standard) * * 1000 : Custom - Specify parameters in Configuration_adv.h * * Use these for Testing or Development purposes. NEVER for production machine. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 #define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 1 #define TEMP_SENSOR_CHAMBER 0


    Temperature limiters (MINTEMP & MAXTEMP)

    Configure in Marlin 2 these parameters is very important, since they control the maximum and minimum temperatures of our printer.

    We will define in which ranges each and every one of the available sensors must be. In this way, if any sensor does not reach or exceed this temperature, Marlin emits an error on the display and deactivates the Hotend and the heated bed.

    In my case I usually set the extruder temperatures at 5 degrees (minimum) and 265 degrees (maximum), como configurar simplify3d Archives. In the event that an extruder or the bed does not reach 5º degrees, we will como configurar simplify3d Archives that the Thermistor is not installed correctly, or is physically damaged.

    In the same way, it will protect us in the event that the maximum temperature is accidentally exceeded, something crucial for our safety and that of our home.

    // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 #define HEATER_4_MINTEMP 5 #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 #define BED_MINTEMP 5 // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) #define HEATER_0_MAXTEMP 265 #define HEATER_1_MAXTEMP 265 #define HEATER_2_MAXTEMP 265 #define HEATER_3_MAXTEMP 265 #define HEATER_4_MAXTEMP 265 #define HEATER_5_MAXTEMP 265 #define HEATER_6_MAXTEMP 265 #define HEATER_7_MAXTEMP 265 #define BED_MAXTEMP 120


    PID Tuning (Extruders)

    Section that controls the settings of the algorithm that manages the temperature of the extruders and the heated bed.

    We could go into more detail on how it works, but it is not the right article. If you are interested in learning more about PID Tuning I recommend that you take a look at the following article at REPRAP about Pid Tuning.

    By default, some values ​​are already predetermined for several of the best known printers on the market. Since my printer does not match the description, I have simply added my own values.

    #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. como configurar simplify3d Archives bytes of PROGMEM) //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) como configurar simplify3d Archives // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array, como configurar simplify3d Archives. // If fewer than EXTRUDER values are provided, the last element will be repeated. #define DEFAULT_Kp_LIST { 22.20, 22.20 } #define DEFAULT_Ki_LIST como configurar simplify3d Archives 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else #define DEFAULT_Kp 20.3 // Values that I added !! #define DEFAULT_Ki 1.43 como configurar simplify3d Archives // Values that I added !! #define DEFAULT_Kd 71.84 // Values that I added !! #endif #endif // PIDTEMP

    To get the values ​​from your printer, you can consult them on the Internet or you can make them yourself with an internal Marlin function called PID Autotune.

    To do this, connect your printer to Repetier/Simplify3D or any other software that allows you to use Como configurar simplify3d Archives commands. Once connected, send the command M303 E0 S200 C8 and the process will begin.

    After heating and cooling the hotend 8 times, it will finish and display the following information. You only have to take the values ​​of Kp, Ki and Kd and enter them in your firmware, in the fields DEFAULT_Kp, DEFAULT_Ki and DEFAULT_Kd.

    bias: 92 d: 92 min: 196.56 max: 203.75 Ku: 32.59 Tu: 54.92 Clasic PID Kp: 19.56 Ki: 0.71 Kd: 134.26 PID Autotune finished ! Place the Como configurar simplify3d Archives, Ki and Kd constants in the configuration.h


    PID Bed Tuning (Heatbed)

    The same as before, but for our heated bed. By default in the new firmware it will be disabled. If you have a heated bed, you must uncomment the #define PIDTEMPBED option as you will see in my configuration.

    You can also run another internal Marlin function to get the optimal values ​​for your bed. This is done with the Gcode command M303 E-1 C8 S90.

    //=========================================================================== //====================== PID > Bed Temperature Control ====================== //=========================================================================== /** * PID Bed Heating * * If this option is enabled set PID constants below. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. * * The PID frequency will be the same as the extruder PWM. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, * which is fine for driving a square wave into a resistive load and does not significantly * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ #define PIDTEMPBED //#define BED_LIMIT_SWITCHING /** * Max Bed Power * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG axure license key crack Archives Sends debug data to the serial port. //120V como configurar simplify3d Archives silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 347.77 #define DEFAULT_bedKi 48.46 #define DEFAULT_bedKd 623.90 //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from pidautotune //#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKd 1675.16 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED

    However, there are times when activating the PIDTEMPBED parameter is more damaging than not activating it. I recommend you not to enable it from the beginning.


    Cold extrusion (PREVENT_COLD_EXTRUSION)

    Both functions manage cold extrusion at Marlin. As we all know, it is not advisable to extrude filament if our Hotend is not turned on.

    The option PREVENT_COLD_EXTRUSION it will directly prevent us from extruding material if our hotend does not reach the minimum temperature defined.

    We can configure at what minimum temperature we will allow Marlin to extrude filament with the EXTRUDE_MINTEMP parameter. By default both are active, so you should not worry.

    However, I have considered it important to name it so that you have proof that it exists.

    /** * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. * Add M302 to set the minimum extrusion temperature and/or turn * cold extrusion prevention on and off. * * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170


    Extrusion lenght (PREVENT_LENGTHY_EXTRUDE)

    As indicated in the comments, it prevents extrusion of filament from a distance greater than the one we have configured. This Email Backup Wizard Keygen Software Free Download that Marlin will only allow you to extrude a maximum of 200mm in a single GCODE command.

    If you want to extrude much more than 200mm in a single command, for example in the case of having a function to load the filament from the display using Bowden, you will have to modify the parameter EXTRUDE_MAXLENGTH for a higher value. Both are enabled by default in Marlin 2.

    If this is not your case, leave it as is. For example, in my case I insert the filament by hand so I have no need to modify it, but it is always good to know.

    /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200


    Thermal protections (THERMAL_PROTECTION)

    These three parameters activate the additional thermal protection that Marlin 2.0.x offers to prevent damage to our printers. They must always be active, in fact they come in Marlin 2 by default, so we will not touch them in any way.

    /** * Thermal Protection provides additional protection to your printer from damage * and fire. Marlin always includes safe min and max temperature ranges which * protect against a broken or disconnected thermistor wire. * * The issue: If a thermistor falls out, it will report the much lower * como configurar simplify3d Archives of the air in the room, and the the firmware will keep * the heater on. * * If you get "Heating failed" errors the * details can be tuned in Configuration_adv.h */ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber


    Mechanical parameters (COREXY kinematics)

    There are different printers with different kinematics on the market. For example Cartesian kinematics, deltas, tripteron, corexy (and their variants), etc, como configurar simplify3d Archives. The truth is that I would take one nice article to talk about all of them.

    In the case that your 3D printer uses COREXY kinematics or any of its variants, you should activate its corresponding parameter. Since I have Cartesian kinematics, I leave everything disabled as you can see.

    //=========================================================================== //============================= Mechanical Settings ========================= //=========================================================================== // @section machine // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed //#define COREXY //#define COREXZ //#define COREYZ //#define COREYX //#define COREZX //#define COREZY //#define MARKFORGED_XY // MarkForged. See,504042


    Endstop availables (USE_XMIN_PLUG & USE_XMAX_PLUG)

    In this section we are going to indicate to our Marlin firmware the limit switches that we have connected to our motherboard. The most normal thing is to have 3 limit switches to indicate the minimum travels (or stops). In this way Marlin determines the initial position (0) in all axes when doing a HOMING.

    Extra sensors can also be installed to determine the maximum travels. They will serve to prevent the machine from moving beyond what is strictly necessary. They are not essential, como configurar simplify3d Archives, but they are a good option to have all the unforeseen under control.

    In my particular case, I have two mechanical limit switches on the X axis (extruder) and on the Y axis (bed). And I also have a leveling sensor in Z, so I only leave the 3 minimun limit switches actived, as you can see for yourself in the following lines.

    // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra como configurar simplify3d Archives. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG


    Endstops logic (ENDSTOP_INVERTING)

    Depending on the type of sensor or limit switch that we use, como configurar simplify3d Archives, they will have a different logic. It has no greater mystery, just leave them all in FALSE, and if one of them does not work for you, change the logic here (you indicate TRUE).

    In my particular case, X and Y I had to pass them to TRUE as you can see here:

    // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe, como configurar simplify3d Archives.


    Drivers configuration (DRIVER_TYPE)

    Configuring the Marlin 2 firmware with the drivers that we have is something essential. But do not worry, it is a very simple process.

    By default you will see that all the options are disabled, so you must enable the ones you are going to use, which will be where you have como configurar simplify3d Archives drivers on your board.

    In my printer I have 3 motors in the 3 axes (X, Y, Z), and a single motor for the extruder. So I enable the necessary options. The first extruder is always named E0 as you can see.

    But not only we must enable the option, but also indicate the driver that you have mounted on your electronics. Since I have DRV8825 , I have indicated it to the compiler, and that’s it.

    In the comments you can see all the types of drivers available in Marlin 2, so locate yours and write it down as it appears.

    /** * Stepper Drivers * * These settings allow Marlin to tune stepper driver timing and enable advanced options for * stepper drivers that support them. You may also override timing options in Configuration_adv.h. * * A4988 is assumed for unspecified drivers.


    Motor Steps configuration (DEFAULT_AXIS_STEPS_PER_UNIT)

    In this section we will tell our printer how many steps will be carried out for each movement unit. Units may be defined in millimeters or inches.

    In the case of using inches, you must activate the INCH_MODE_SUPPORT parameter. We are not going to activate that parameter, since we usually work with millimeters, and in this section we will introduce our steps for each of the axes and the extruder.

    You first need to know the values ​​to enter, so I recommend that you extract them from some firmware already available for your printer (to be safe).

    Another option is to search for it on the Internet from some other user, browse forums, consult the manufacturer or, as a last option, como configurar simplify3d Archives, calculate them yourself as you can see in this video.

    /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * como configurar simplify3d Archives X, como configurar simplify3d Archives, Y, Z, E0 [, Lumion 10.2 Crack Archives, E2.]] */ #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 800, 803 }


    Auto leveling sensor location (NOZZLE_TO_PROBE_OFFSET)

    In the case that you use a self-leveling sensor (as is my case), you must indicate its position with respect to the nozzle to Marlin. This will necessarily be separated and we will define it as coordinates and in millimeters.

    My level sensor is located 37mm to the right of the Nozzle, and 2mm further behind it, como configurar simplify3d Archives, como configurar simplify3d Archives the following configuration would remain:

    /** * Nozzle-to-Probe offsets { X, Y, como configurar simplify3d Archives, Z } * * - Use a caliper or ruler to measure the distance from the tip of * the Nozzle to Navicat Premium 15.0.26 Crack + Registration Key 2021 Latest center-point of the Como configurar simplify3d Archives in the X and Y axes. * - For the Z offset use your best known value and adjust at runtime. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.


    Leveling speed (XY_PROBE_SPEED)

    This parameter defines the speed that Marlin 2 will use when moving the auto level sensor between 2 measurement points. By default it comes in 133 * 60 mm/min, como configurar simplify3d Archives, you can leave it by default or upload it, at your discretion.

    // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_SPEED (133*60)


    Reverse direction of motors (INVERT_X_DIR)

    We will modify these parameters if when doing a HOME or when printing any part with our printer, any of the motors goes in the wrong direction. By default they are all configured como configurar simplify3d Archives the FALSE option, but in my case I had to reverse the direction of my bed (Y axis) as you can see below.

    However, another option is to invert the motor connection cable, so you can choose the more comfortable solution for you.

    // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the como configurar simplify3d Archives way. #define INVERT_X_DIR false #define INVERT_Y_DIR true #define INVERT_Z_DIR false


    Printing volume (X_BED_SIZE & Y_BED_SIZE)

    We will define here the exact size of your Heatbed. My printer has a 285x206mm horizontal bed, so it would be configured this way:

    // The size of the print bed #define X_BED_SIZE 285 #define Y_BED_SIZE 206


    Movement limits (MIN_POS & MAN_POS)

    Once the size of our printing base (Heatbed) have been defined, we must configure Marlin 2 with the minimum and maximum limits of movement.

    By default, como configurar simplify3d Archives, for the minimums Marlin comes configured with the value 0, which we should not modify since it is HOME. For the maximum limits, Marlin directly uses the current size of our Heatbed in X and Y, which we had previously left configured in the previous parameter.

    To finish with the configuration, in the Z axis the measure that we must add is the maximum printing height of your 3D Printer. In my particular case, I can print approximately 296mm, so I enter its value.

    // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE #define Z_MAX_POS 296


    Movement restrictions (MIN_SOFTWARE_ENDSTOPS)

    For security reasons, and to avoid damaging the components of our printer, Marlin 2 comes by default configured so that we cannot exceed the minimum limits.

    This means that when reaching a limit switch or sensor, it will not allow the engine to advance further even if you do it manually.

    However, like many other things in Marlin 2.0.x, you can disable that limit if you wish. It is an option that I DO NOT RECOMMEND, but I wanted to comment on its existence.

    I personally usually remove the limit on the Z axis. But as I have told you, unless it is essential or you know very well what you are doing, you must leave the values ​​that the firmware brings by default.

    // Min software endstops constrain movement within minimum coordinate bounds #define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif



    Marlin offers us the possibility to change the configuration of our printer from the display itself and then save the changes in the Eeprom.

    If we want to have this possibility active, we must activate this parameter in our firmware.

    #define EEPROM_SETTINGS // Persistent storage with M500 and M501


    Pre-heating ABS/PLA (PREHEAT)

    As you can see if you have already messed with your printer, Marlin offers Live tv crack serial keygen two initial options to pre-heat the printer prior to printing.

    You can set the como configurar simplify3d Archives available for ABS and PLA filaments, although you could add more if you wish.

    Something quite useful because the ones that come by default in the firmware can be improved. I personally leave these settings:

    // Preheat Constants #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 250 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255


    Menu language (LCD_LANGUAGE)

    Language that will appear in each and every one of the Marlin 2 firmware menus (display). At the moment, the one that convinces me the most is Spanish, so it is the one I have selected.

    By default it comes English, so choose here what you need.

    /** * LCD LANGUAGE * * Select the language to display on the LCD, como configurar simplify3d Archives. These languages are available: * * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, * ko_KR, nl, pl, como configurar simplify3d Archives, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test * * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese como configurar simplify3d Archives, 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } */ #define LCD_LANGUAGE es


    SD Card support (SDSUPPORT)

    More than likely, it is essential to activate this option. It allows you to load the STL files using an SDCard.

    Believe it or not, it is disabled by default in our Marlin firmware. You will need to activate it, as I have done in my firmware.

    /** * SD CARD * * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. * */ #define SDSUPPORT


    Simplify menus (SLIM_LCD_MENUS)

    Marlin gives you the ability to navigate through countless menus from its display, to a point that is overwhelming (at least for me).

    By the way, many of these parameters should have been previously configured in your firmware, without having to modify them “on the fly”.

    To reduce the number of these menus, Marlin offers you the option of simplifying them with the SLIM_LCD_MENUS parameter. Not only will it simplify the menus, como configurar simplify3d Archives, but you will save a not inconsiderable amount of memory. I recommend that you activate this option.

    /** * LCD Menu Items * * Disable all menus and only display the Status Screen, or * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS #define SLIM_LCD_MENUS


    Display type (LCD / Controller Selection)

    Guía completa para configurar Marlin 2.0.x desde cero y no morir en el intento

    And finally, we have reached the display settings. If we take a close look at the Configuration.h file, we will see that there are countless displays.

    It may seem a bit complicated, but really all we have to do is find the description of our LCD screen and uncomment in order to configure Marlin 2.

    There are text-based displays, graphic LCD displays, OLED displays, como configurar simplify3d Archives, and some Keyboard Layout Manager 32 bit v1.121 crack serial keygen. I have one based on graphics called MKS MINI 12864 (pictured above). To do this, uncomment the following line.

    If you cannot find the name of your screen, I recommend that you use the “Search” function of Windows, it is the fastest and easiest way.

    // // MKS MINI12864 with graphic controller and SD support // // #define MKS_MINI_12864


    A small detail to have in mind. In some cases (like mine), it is necessary to have external libraries to compile the firmware with support for our display, como configurar simplify3d Archives. This is the case of the MKS MINI12864 display, you need to search and install them manually.

    If you try to compile it, Marlin will give you an error, and it will tell you which library you need to install. For example, in my compilation it asks me for the U8glib library, let’s see the error:

    sketch\src\HAL\HAL_AVR\u8g_com_HAL_AVR_sw_spi.cpp:65:10: fatal error: U8glib.h:
    No such file or directory

    The solution is very simple, como configurar simplify3d Archives, we will go to the menu Tools->Manage libraries and we will make click on it. In the search box we will enter U8glib and press ENTER.

    The online libraries available with this search parameter will appear and we will see that at the end there is ours “U8glib by Oliver”. Another click on the INSTALL button and solved.

    Finally, the contrast setting of the display did not convince me too much, since it looked a bit dark at first, so I decided to change it.

    You can modify the contrast (make the screen lighter/darker) from the display itself, but I prefer to leave it already set in the same firmware, since it is an option that I will not modify again, and in case I reset the EEPROM I won’t have to configure it again.

    For this I had to edit a special file called “pins_RAMPS.h” located in the path \Marlin\src\pins\ramps\. Once edited, we will add the line #define LCD_CONTRAST 150 as we can see in the following lines:

    #elif ENABLED(MINIPANEL) #define BEEPER_PIN 42 // not connected to a pin #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define DOGLCD_A0 44 #define DOGLCD_CS 66 // GLCD features // Uncomment screen como configurar simplify3d Archives //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define Como configurar simplify3d Archives #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 #define SD_DETECT_PIN 49 #define KILL_PIN 64 #define LCD_CONTRAST 150


    Leveling the Heatbed (BED_LEVELING)

    There are various methods or functions available in Marlin 2 to help us self-level our bed. By default they are deactivated in the firmware so we must activate them to be able to use them.

    Explaining each and every one of them would give to write a complete article, so I will directly show you how to level the bed in two different ways. The first in the case that we do not have a leveling sensor installed and the second in the case that we do.

    To begin, and in both cases, we must uncomment the AUTO_BED_LEVELING_BILINEAR function and then the RESTORE_LEVELING_AFTER_G28 function, so that Street Fighter 5 v5.012 Crack Archives remain active in our 360 virtual tour Archives /** * Choose one of the options below to como configurar simplify3d Archives G29 Bed Leveling. The parameters * and behavior of G29 will change depending on your selection. * * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! * * - AUTO_BED_LEVELING_3POINT * Probe 3 arbitrary points on the bed (that aren't collinear) * You specify the XY coordinates of all 3 points. * The result is a single tilted plane, como configurar simplify3d Archives. Best for a flat bed. * * - AUTO_BED_LEVELING_LINEAR * Probe several points como configurar simplify3d Archives a grid. * You specify the rectangle and the density of sample points. * The result is a single tilted plane. Best for a flat bed. * * - AUTO_BED_LEVELING_BILINEAR * Probe several points in a grid. * You specify the rectangle and the density of sample points. * The result is a mesh, best for large or uneven beds. * * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) * A comprehensive bed leveling system combining the features and benefits * of other systems. UBL also includes integrated Mesh Generation, Mesh * Validation and Mesh Editing systems. * * - MESH_BED_LEVELING * Probe a grid manually * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) * For machines without a probe, Mesh Bed Leveling provides a method to perform * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR #define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable * this option to have G28 restore the prior leveling state. */ #define RESTORE_LEVELING_AFTER_G28

    In this way, our sensor will go down at various points and create a virtual 3D mesh with the different heights. And since I always like to do the HOME in the center of the bed, I activate the option Z_SAFE_HOMING.

    #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #endif

    Once all this is configured, apply only the option you need for your firmware, option 1 without sensor or option 2 with sensor. Activating both is not necessary and can give you problems or compilation failures. Go for it…


    Option 1: Sensorless configuration (4 corners)

    This configuration is what como configurar simplify3d Archives are going to apply if we como configurar simplify3d Archives not have a leveling sensor in our print head. First we will indicate to Marlin 2 that we are going to perform the leveling without having said sensor.

    /** * The "Manual Probe" provides a means como configurar simplify3d Archives do "Auto" Bed Leveling without a probe. * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY //#define MANUAL_PROBE_START_Z 0.2

    Then we will indicate how many test points (Probe points) we want our manual leveling to carry out, so we will modify the GRID_MAX_POINTS parameters. To level the 4 corners we will need 4 points, so we will leave the configuration in this way.

    // Set the number of grid points per dimension. #define GRID_MAX_POINTS_X 2 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

    Last but not least, we will activate the LCD_BED_LEVELING and LEVEL_BED_CORNERS functions. This will create the appropriate menus on the display for this purpose.

    /** * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment //#define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment #define LEVEL_BED_CORNERS


    Option 2: Sensor setup (BABYSTEPPING)

    This is the setting that I personally use on my printer with my level sensor on the head, como configurar simplify3d Archives. In my case I used an infrared sensor, but it is applicable for any type of sensor (inductive, capacitive, IR, etc.)

    If you have a BLTouch, como configurar simplify3d Archives, I do recommend that you look for a more specific manual, since Marlin brings specific functions for it. Precisely in 3DWork we published a very complete article on how to configure it: Install and configure BLTouch/3DTouch como configurar simplify3d Archives Marlin 2.0.x (MKS Gen, SKR, Anet A8, RAMPS)

    Returning to our configuration, the first modification that we will make will be to indicate to Marlin that we have a fixed self-leveling sensor in our machine.

    For this we will como configurar simplify3d Archives the following line and leave it like this:

    /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ #define FIX_MOUNTED_PROBE

    Then we will configure how many test points (Probe points) we want our leveling with sensor to carry out, como configurar simplify3d Archives, so we will modify the GRID_MAX_POINTS parameters.

    I usually carry out 9 checkpoints before each print, so I leave the default options which are 3 per axis (3 x 3 = 9).

    // Set the number of grid points per dimension. #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

    Then we must edit a new file called configuration_adv.h. It differs from the first basically in that it offers us more detailed customization options, add-ons and experimental or under development functions (such as BABYSTEPPING)

    Guía completa para configurar Marlin 2.0.x desde cero y no morir en el intento

    I use a leveling function available in Marlin 2 called BABYSTEPPING on my printer. This function allows me to calibrate with a sheet como configurar simplify3d Archives paper the height of my leveling sensor in the center of the bed once.

    Later, the printer will perform 9 test points (Probe Points) automatically at the beginning of each print. This way I won’t have to go corner by corner unnecessarily to calibrate my bed.

    By default it is deactivated, so we will activate the BABYSTEPPING option as I show you below:

    /** * Babystepping enables movement of the axes by como configurar simplify3d Archives increments without changing * the current position values. This feature is used primarily to adjust the Z * axis in the first layer of a print in real-time. * * Warning: Does not respect endstops! */ #define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement), como configurar simplify3d Archives. //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way adobe premiere pro cc 2015 [july 2017]  ❌ //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY Powered by Wordpress

    Источник: []
  • crealty ender 6 Printer profile

    Hello GZZ,

    if You use the path in the readme there is the location were you need to copy the files.
    Be aware it needs to be  a clean install.

    If You change something in cura it will make new files and put them in c:\Users\<Username>\AppData\Local\cura\<Version>\

    When I tried it the first time I also didn't do a clean install.

    Wit a clean install You need to uninstal Cura and need to throw away the files under cura in the maps:



    those will stick around when you only uninstal the program, como configurar simplify3d Archives.

    I updated the zip File to clarify the installing process.

    The modification in the start g-code for the dual preheat isn't added its easy to ad this in the printer settings if you want them. Maybe on a later time we will ad this in a separate file because we also need to test them .

  • Источник: []

    3D Scanning and Printing

    Fifth class

    Fifth week


    Last February 24 was the fifth class of 3D Scanning and Printing. Thanks to the Barcelona and Lima team I have been able to learn about many software to achieve different results. This topic interests me a lot, I had the opportunity to explore a 3D printer some time ago in Fab Lab Lima and I really liked everything that can be achieved with it. 😃

    One of the most beautiful memories I have is having taken it to the Peruvian Amazon. Thanks to an alliance with some organizations and the management of the state, Fab Lab Peru had the opportunity como configurar simplify3d Archives share knowledge about 3D printing technology, the students were amazed and very happy to learn about this type of alternatives in digital manufacturing, como configurar simplify3d Archives. Here I show a picture where we used a 3D printer on ManyCam Pro Download With Crack [ Latest Version] boat on the Marañon River.
    It was really beautiful! 💓

    3D printing in the Amazon river

    My experience

    First steps

    In order to understandthe operation of a 3D printer,I first resorted to diagramming both the physical part and the process to achieve a product. 3D printers come in many shapes, sizes, features in general,but they all handle a similar operation. Below I show you some of my drawings and description of its parts and some concepts in general. 💪

    3D Printing

    1. Base plate:Receives 3D model information from the computer via USB port or SD como configurar simplify3d Archives and transmits it to the motor controllers.
    2. USB port:CUSB ports are designed to transmit electrical power to the device that is connected, so no additional cable is needed to connect to a power outlet.
    3. SD card slot:They have the ability to read and write data to and from SD memory cards, which allows data to be saved for later access.
    4. Extruder:A cartridge applies heat to red giant crack serial number full download Archives metal core that melts the plastic. The core is wrapped by an insulator.
    5. Printing nozzle:The molten plastic comes out of the extruder tip to form the layers of the printed object.
    6. Materials used:Acrylonitrile butadiene styrene (ABS),high density polyethylene and polyactic acid ExpanDrive FREE DOWNLOAD Archives. (PLA)
    7. Three axes of movement:To build a 3D object, the printer moves in three planes, each on a different axis.

    A. X plane:Moves the platform from side to side.
    B. Y plane:Moves back and forth creating each of the strata.
    C, como configurar simplify3d Archives. Z plane:Move the extruder vertically to add the layers.


    The sequencefor 3D construction has a series of steps that are not so complicated to understand, like any system, the 3D printing machine has an input, process and output.These are linked to certain programs that will help us to complete the cycle. Below are some explanations. 💪


    1.What do I need?: A computer, CAD software and 3D printer. As a first step we export the file in STL format, the exported file is a grid that includes the 3D shape of the object.
    2.This software is responsible for laminatingthe entire object vertically, hundreds of layers, with this we observe the number of layerswith which the object will be created.
    3.When the printer heats up, it begins to recognizethe movement in the different como configurar simplify3d Archives and deposits the material chosen to start the sheets.
    4.The overlapping of sheets is completed starting from the lowest part (next to the bed)and goes up to the last point on the Z-axis.This completes the construction of the physical object.


    3D Scanning

    A 3D scanner is a machine used to capture the geometry of an objectand its color to then form a 3D model of it. That is, it is capable of transforminga real object into a virtual one that we can manipulate with our computers and specialized programs. Its use is very variedand is currently used in many sectors such as art conservation, sculpture reproduction, dimensional control, quality control, reverse engineering of parts, use in the dental area, architecture, archeology, etc. Here I show a little of the logic of the process.


    There are two types of scanners,contact and non-contact, como configurar simplify3d Archives, depending on the type of object to be scanned. In the case of non-contact there are three distinctions, one is a laser scanner, another is a structured white light scanner and the third is a time-of-flight como configurar simplify3d Archives. There are also several ways to solve this process without having the machines, in my case I had to solve it from home and it como configurar simplify3d Archives a good experiment.🤩


    First Assignment

    Grupal Assignment

    In this group assignment we are asked to determine the design rules for our 3D printer, it is interesting once again to share that our team is still working each one from home, each one has a printer that we were able to distribute for the individual work of each one. In this segment I will share the explorations we did as a team with remote work. 😃

    Working at Home

    Test the design rules Diablo 2 all crack serial keygen your 3D printer(s)

    Given the situation, resolving our assignments has been a real odyssey, even so, and thanks to the movement we have generated to solve the problems, we are using our homes as laboratories. In the case of the group assignment I managed to get the 3D printer of the Fab Lab that I have used before, I had already handled it but I had a big mishap.

    My first trip was to Benito Juarez's house, thanks to my dad I was able to go get the machine and bring it home, after that shipment and not being able to calibrate it I received a delivery from my partner Jesus Lucero, unlike the first machine this one was different and I had never handled it so I had to learn how to operate it. It was great to get to know a new printer.

    Once again I thank Fab Lab Lima for the support with the necessary materials to fulfill my weekly task, so far I have been able to get the minimum necessary and that has allowed me to learn a lot. 💓

    Super Team Fab Lab Perú.

    - Well, the first machineI brought home was the Colido Compact, I had already used this machine before when we were giving digital fabrication workshops to students in different parts of Peru, I will now mention some of its features. ✔️

    - Construction volume:13 x 13 x 13 x 13 cm
    - Printer size:27.6 x 31.8 x 31.8 x 34.3 cm
    - Printer weight:7 kg
    - Nozzle diameter:0.4 mm
    - Filament diameter:1.75 mm
    - Filament material:PLA
    - Structure:Acrylic
    - Software:REPETIER-HOST
    - File types:.STL, G-Code
    - Operating system:WINDOWS 7, Como configurar simplify3d Archives OS, LINUX
    - Power:12 W

    Colido Compact

    Colido Compact

    - The software I used was the Repetier Host,this previously allowed me to print designs on this printer but this time apparently something was wrong. When I started the printer connectionand changed the filament (heating the extruder)there was no problem, then I tried the axes and the x-y-z movement and there were no problems either. When I downloaded a test file from the internet and placed it in the software it allowed me to generate the respective slicerto laminate the object and it came out that it would take almost 3 minutes, until then everything was fine. Como configurar simplify3d Archives I clicked on print and the bed began to rise, when it was located at the correct heightthe extruder did not make any movement, 😢 I waiteda few minutes and it did not move either. In the end I cancelled the como configurar simplify3d Archives and checked the printer settings.

    Repetier Host

    Repetier Host

    - The reason why the printing was not workingwas basically due ZD Soft Screen Recorder 11.2.1 license key Archives the non-response of the order to start moving in the defined axes. That is to say that the extruderdid not respond to the order Kernel for SQL Recovery 18.2 crack serial keygen by the software, como configurar simplify3d Archives, according to the investigations that I managed to do with my teammay be for various reasons, como configurar simplify3d Archives motor issue, the G Code, some configuration of the printer, como configurar simplify3d Archives, etc. I did the respective tests but given the short time to solve the assignmentI was supported by sending me a new printer. I was lucky to get it! :star2:

    - And well, my first test with this printer was so bad 😅 that when I tried about three files, they didn't come como configurar simplify3d Archives well. Unlike the compact, this machine did print without problems,it has another operation process since it does not need a cable to connect it to my computer como configurar simplify3d Archives a MicroSD where the laminated designs are saved from the CURA software. This printer fonelab registration code crack Archives a different appearance, it does not have a cover like the compact and is a little bigger, here are some of its features.

    - Modeling Technology:FDM(Fused Deposition Modeling)
    - Printing Size:220*220*250mm
    - Printing Speed:≤180mm/s, normal 30-60mm/s
    - Filament:1.75mm PLA, ABS, Wood, TPU, como configurar simplify3d Archives, Gradient color, carbon fiber, etc.
    - Working Mode:Online or SD card offline
    - File Format:STL, OBJ, AMF
    - Slice Software:Cura, Repetier-Host, como configurar simplify3d Archives, Simplify3D

    - As you can tell, the calibration of the machine was very spotty, it took me a while to dedicate myself to understanding everything from how to turn it on to calibrating the bed. Thanks to some tutorials I was able to get a good result, after several attempts of course. Here is the evidence, como configurar simplify3d Archives. 💪

    First experience

    - After following this vídeo tutorial, it became much easier to manipulate the machine, I think that at the beginning of everything it is always a little scary to move Nero 20 keygen,serial,crack,generator,unlock,key settings but it is necessary to lose the fear little by little to get familiar with the como configurar simplify3d Archives. In this video you can see how to calibrate a bed just with a sheet of paper and a couple of files that they share with us, it worked for me, I recommend it.🤩

    When I got the calibration I did the test with the following models downloaded from thingiverse

    Good calibration

    A ring

    - After those small testsI wanted to try the tests that we have in the academy page,the first one went como configurar simplify3d Archives well, it made me think and reconfirm that the machine was ready for any 3D design. 😃

    - The funnything about the learning process is that not everything will go right, the second test I sent was a disaster,this happened because I did not realize the form and the need to give the indication to the machine to have elements flying. Here I show the reality vs. the expectation. 😭



    - Well, it was clear, it was necessary to place the support,I did not realize this or the importance of what it means to configure the support until this exercise, it is good to learn by making mistakes, como configurar simplify3d Archives. To correct this mistake I made the configurations in CURAwhich is the software I como configurar simplify3d Archives using now and automatically the necessary supports appear. 💪

    New attempt

    New attempt

    - Finally I managed to do one more test from academy and one that I found on thingiverse, there are severalfiles that you can use for testing so I recommend exploring a lot to have a variety of possibilities and analysis of your 3D printer.

    - Thanks to all these explorations I have learned the handling of a 3D printer and its capabilities to perform the work in detail, I am sure that the more you practice the better the results will be. 🤩


    Second Assignment

    Individual Como configurar simplify3d Archives As an individual assignment I have had a very interesting week, thanks to the different explorations I have managed to overcome to be able to print and scan my individual object. More important than the result has been the whole process that I lived, without a doubt overcoming obstacles makes us learn many things that have much more value than just fulfilling a weekly task. All this, of course, would never be achieved without a team behind me. 😍

    First part

    Design and
    3D print an object

    For me this week was not so easy, it took me quite some time to understand the calibration of the 3D printer, I did a lot of tests both default and designed, every time I have used the printer I have had the feeling that getting a design in physical by our own means is awesome.

    Unlike before, this time I was able to take the time to play and have fun with my creations, it was also a challenge to get the shapes to hold and be non-subtractive, I think the first important thing to get this assignment is to know your machine well. And not to give up. 💪

    My proposals

    My explorations

    As an initial como configurar simplify3d Archives in my exploration, I had the opportunityto find a design that really caught my attention.This is a kind of magic sphereas it fulfills an interesting projection on a paper. What happens is that this sphere is defined by lines of different thicknesses and curvedthat when you put a light on it vertically this is projected as a Jogos de Cliques de Graça para Baixar grid, como configurar simplify3d Archives, here I show you the result!😍

    Final result

    Final result

    I really likedthis experimentation 😍 and I think that if you have the opportunity to build itand generate it yourselves it will be great. Now that I played a little with como configurar simplify3d Archives machine I did two teststhat the Fab Academy gives us, I liked both of them because I learned the sense of the supports. Number 1 was simple, the machine I work with showed me that I could do that test. The second test had an error in the first shipment, it happens that by not putting support the disasterwas disastrous, then when you put the support you can see the difference, now I share the images.

    My designs

    This week I ventured to explore two softwarefor the designs, first I wanted to use Fusion 360,it is the first time I design to print in this program and I found it very good, the default meshes make it easier and faster prototyping, here I show some examples.

    I chose these first meshes to test the printing from Fusion 360and I really liked the result, the printer did a good job and quite clean,then I ventured to generate something different from FreeCAD,this program also for the first time has served me to print in 3D,unlike the previous Ray Dream Studio v5.0 Ray Dream Main Program crack serial keygen I wanted to start generating movement at some point in the design, I thought of starting from a concept of articulation, here the result.

    Finally I decided to use Fusion 360for this week's final non-subtractive proposal, with the base of a sphere and some planes that made me cut some parts of the surface I ended up having a curious proposal with another sphere inside, the process took me timebecause I could not find the way to use the least amount of support by default, CURAalways gives you the option to put support or not to put anything and you assume the consequences, I assumed the consequences in several testsand my designs ended very badly but with practice I achieved the following result.

    This experience has been great,I had not explored a 3D printer this much or designed something that challenged the material conditions and printer settings, como configurar simplify3d Archives. My recommendationis to give considerable time to testing, for any design you want to create, in my case I have had many previous tests and I still want to continue doing it, no doubt I will buy my own printerthis year. Here I show you the total final results.


    I want to share that I also used for the first time Blenderfor 3d printing. This allowed me to make much more organic things, it definitely depends a lot on what kind of shapes or figures you want to design to choose the right software, here I share some of my explorations, I really enjoyed learning it!

    This step by step was the basic one to start getting organic shapes, you can do the same from a cylinder, a square, a torus, etc. In my case I used the beginning of a sphere and I was able to get layers with two PLA filaments, red and green. I recommend exploring it.

    Second part

    3D scan an object
    and print it

    This week's adventure on the scanner was a bit difficult but thanks to a thousand ways of working things out, we made it. I don't have a scanning machine, nor does the Fab Lab have one, so each team member had to figure out how to solve the task.

    In my case como configurar simplify3d Archives to my sister Stacy Ascencio I was able to use her Iphone to find some scanning tools from an application, I didn't think it would be so good but the most important and interesting thing is that it is so easy to access a scanner from your cell phone that you can really do the job wherever you are. 😃



    - I will start by showing the application that I used from my sister's Iphone, this is called Qlone,I recommend it because I found it complete, simple to understand and easy to install. In the same application they explain you the steps to follow to get your object scanned, here I show you some parts and my first test. Qlone link

    - To do the job well this app asks you to download a PDFsheet of graphics that will serve as a basis for the recognition of the object, it is a kind of mat where you will place the object to be scanned. The important thingis to keep in mind that the object can not pass certain measures in the z-axis or else it will happen to you what happened to me with this first prototype.

    - This process is like a photo sweep, as you move the camera, the blue sections of the half spherecreated by the application disappear. An important factor is the light,try to have the best lighting around to get a good resolution, como configurar simplify3d Archives. My object was a Peruvian brand milkjar that I had on hand, as it complied with the standard measurements to put it inside the mat, I used it and look how it turned out.

    I didn't get the result 100% but it was a good first try, then I made other tests with the help of better lighting and I could realize the differences, the heights and the size in general will make your result optimal or not, also the sweep mode, you have to be careful with that process.

    The best scan I had was the alcohol gel scan, this object came out perfectly, the difference was the size, the shape and the light it was exposed to, anyway I recommend Qlone because it is a very accessible and easy to handle application.



    Download the files here

    FreeCAD 1
    FreeCAD 2
    FreeCAD 3
    Fusion 360 1
    Fusion 360 2
    Fusion 360 3

    Источник: []

    Simplify3D In-Depth Articles

    A wealth of information is available to help you become acquainted with the Simplify3D All-In-One 3D Printing Software. Topics are grouped by experience levels so you can find the information you need quickly and easily.

    • All
    • Level 1 : Beginner
    • Level 2 : Intermediate
    • Level 3 : Advanced
    Simplify3D - working with file types

    Working with File Types

    This introductory tutorial will help you understand how different file types are used in Simplify3D. You’ll also learn how to save these files to develop a more efficient workflow.

    Read more

    Simplify3D - variable settings wizard chess piece

    Different Settings for Different Regions of a Model

    Learn how to apply different slicing settings for one specific layer or region. This unique ability of the software opens up a whole new world of possibilites and makes printer calibration a breeze!

    Read more

    Simplify3D - multi-color traffic cone

    Printing With Multiple Extruders

    Learn how to get the most out of your 3D printer with multiple extruders. This tutorial will teach you about popular topics such as multi-color printing or using alternate materials for support structures.

    Read more

    Simplify3D - brim examples

    Rafts, como configurar simplify3d Archives, Skirts and Brims!

    This tutorial will help you understand the differences between rafts, skirts and brims. All three techniques provide a starting point for your model, but they have different uses and Genymotion torrent Archives more

    Simplify3D - g-code tutorial

    3D Printing G-Code Tutorial

    This guide covers to 10 most common G-Code commands you need to know for 3D printing. We explain what each command does and provide examples that you can test on your own 3D printer.

    Read more

    Simplify3D - auto bed leveling sensor

    Beginner’s Guide to Auto Bed Leveling

    Making sure your 3D printer has a level build platform is a critical factor for ensuring accurate prints. This article will explain why the auto bed leveling feature como configurar simplify3d Archives important and how to use it in Simplify3D to ensure you are printing on a level bed every time.

    Read more

    Simplify3D - first layer with rectilinear pattern

    Perfecting the First Layer

    A successful first layer is vital to a successful print. This tutorial will guide you through the steps to insure that your first layer sticks to the bed every time. While it might be tempting to start printing, the first step is to make sure your machine is properly calibrated and leveled.

    Read more

    Simplify3D - cross section of pyramid

    Identifying and Repairing Common Mesh Errors

    There are plenty of 3D models available on the internet, but Rubymine 2018.3.3 full version Archives of these files were not optimized for 3D printing. This tutorial will teach you how to repair common mesh errors that you might find in these files so that you will know how to troubleshoot these issues if you encounter them.

    Read more

    Simplify3D - support generation toolbar

    Adding and Modifying Support Structures

    This tutorial will teach you about the unique ability of the Simplify3D software to control where support structures are placed. The software will make a suggestion about where support material should be placed and then you can add or remove as needed.

    Read more

    Simplify3D - Compressor wheel in software

    Importing and Manipulating Your Models

    The first step to using the Simplify3D software is knowing how to import your models into the program. This tutorial covers what 3D file types are supported, how to get your files into the software, como configurar simplify3d Archives, and basic model manipulation and positioning.

    Read more

    Simplify3D - turbine wheel with single extrusion walls

    Printing Thin Walls and Small Features

    Learn the best ways to print thin walls on your 3D printer. We also cover tips for gaps on the inside of your part so that you can ensure these voids are perfectly filled in.

    Read more

    Simplify3D - chess 3D knight and pawn

    Multi-Part Printing

    If you frequently print more than one model at a time, this is a great tutorial to read! You will learn about topics like sequential printing and even how to specify different settings for different models on your build platter.

    Read more

    Источник: []

    Simplify3D 4.1.2 Multilanguage x86/x64

    Simplify3D is a professional and efficient program for navigating and navigating como configurar simplify3d Archives printers. Using the maximum capabilities of 3D printers requires a number of factors to consider. These printers are heavily dependent on the configuration and configuration of como configurar simplify3d Archives print parameters. The program integrates the process of optimizing and optimizing 3D printing operations and gives you the ability to experience the best and highest quality 3D printing in as little time as possible, como configurar simplify3d Archives. However, there is no need to use miscellaneous software for 3D printing side jobs.

    All you need to do in this program is just take some time and try to learn the software to increase the quality of work. With this software you can import different types of eskportirovat models and send them to the printer after fragmentation and cutting. Instead of spending a lot of time cutting out your desired models, do so in a matter of seconds. Its support for a wide range of printers as well as its flexibility have made it the ultimate choice for anyone with any taste.

    Источник: []

    Notice: Undefined variable: z_bot in /sites/ on line 99

    Notice: Undefined variable: z_empty in /sites/ on line 99


    Leave a Reply

    Your email address will not be published. Required fields are marked *